The Solution S2 i-Fix contains a built in ventilation system which ensures the seat is always at an optimal temperature to prevent your child from overheating on hotter days. The seat of the Solution S i-Fix is extra wide and deep which gives your child adequate space and comfort from the padding. BertieBotts , I think you're right, a HBB is definitely the way to go as the harness of anything else would be redundant and don't really need the features aimed at younger kids, Narrowed it down to these (Inc current prices) The main difference between the X-fix and the S-fix is that the S-fix is a much newer seat design. The S-fix has longer body guards at the sides and better side impact protection, including pop out pieces which really make a difference (but can take up more space in the car) and it also has a sort of internal recline in the headrest which is supposed to keep their head within the support guides when they sleep a bit better. I think the headrest extends a little bit higher on the S-fix as well compared to X-fix.

Cybex Solution S-Fix vs Cybex Solution S2 i-Fix | ⿻ Full Cybex Solution S-Fix vs Cybex Solution S2 i-Fix | ⿻ Full

I don't want to go with the Tanza just because it's cheapest, if i need to spend more for a better seat then i will. Always had Maxi-Cosi seats so no experience with the Cybex rangeThe Solution S2 i-Fix is built with an energy- absorbing shell which works to absorb the forces of an impact and therefore provides excellent protection to the child. Additionally, the Solution S2 i-Fix contains Linear Side-impact protection system which enhances the safety and protection during a side collision. The linear side impact protection system must be extended on the side closest to the vehicle’s door and this has been proven to reduce the impact of a side collision by approximately 25% compared to seats without the linear side impact protection system in place. The Solution S2 i-Fix can be used with or without isofix. Therefore, the vehicle does not need to have isofix anchors to use the Solution S2 i-Fix safely.

Produse Cybex - eMAG.ro Produse Cybex - eMAG.ro

The four covers of the seat are fitted into the cover attachment channels on the edge of the child seat and are held in position at several places by press-studs. To remove the covers, follow these steps: The Solution S2 i-Fix can be used in any vehicle that has 3-point seatbelts. The Solution S2 i-Fix cannot be used on a vehicle seat that only has a lapbelt and it cannot be used in front of an active airbag in some cars as the force of the airbag deploying can severely injure and even kill a child. Sklopná opěrka hlavy udržuje hlavu spícího dítěte v chráněné poloze, obklopenou chrániči hlavy a ramen sedačky. V případě bočního nárazu The overall safety score is made up of the results of crash testing (front crash; side crash) seat design, stability in the car and belt routing. Our crash tests go beyond the legal minimum requirements for UK car seat regulations and are conducted at higher speeds and forces than the regulations require. We feel our tests more accurately reflect what could happen in a real life crash. The cover of the Solution S2 i-Fix consists of four individual parts; the headrest flap, the headrest, the shoulder part cover, and the seat surface cover.The Solution S2 i-Fix is a Group 2/3 approved child booster seat. This means that it is approved for use from at least 100cm and 15kgs until 150cm or 50kgs.

Cybex Gold Solution S-Fix High Back Booster Car Seat, For

Cybex recommend that the Solution S2 i-Fix be used for no longer than 9 years. This is only applicable if the seat has not been in an accident, dropped, or on an airplane without being boxed. The Solution S2 i-Fix contains sufficient padding all round for the best protection and comfort. The headrest has 12 height adjustable positions which ensures that the vehicle’s seat belt fits safely and comfortably over your child as they grow. Additionally, the head protectors are made to grow with the personal space requirements of the child for optimal comfort. jsou hlava a krk chráněny, zatímco systém lineární ochrany při bočním nárazu pomáhá odvádět síly nárazu směrem od dítěte. Nastavení výšky jednou rukouWith or without XP-pad - a foam pad which goes across the child's chest and absorbs some forces of a frontal impact. The top ones I'd recommend at the moment are the Cybex Solution S-fix and Z-fix - the difference between these is that the Z-fix expands widthways as well as upwards, whereas the S-fix is just upwards. But if your little one has outgrown a Group 1 seat then they will likely be too big for the harness part in the Titan anyway, so it's correct there's not much point bothering with this. If you really did want to harness then you could look at seats which harness up to 25kg, like Joie Bold. You need top tether and isofix in your car to use these seats. Personally for a 5yo unless there are behavioural issues with using a seatbelt, I'd just go for a well rated HBB :) The Cybex seats have reclining headrest feature which helps with falling asleep and tend to fit petite kids well, but also go up nice and high to last you until the child is able to use a normal seatbelt. If you fit with isofix you can also recline the whole seat a little bit. Between version 2 / 3 - the 3 is a bit more up to date and has a longer seat so more support for older children with longer legs. If you choose the XP pad version, the 3 tends to be a bit better at letting the seatbelt retract whereas version 2 has a problem with belt retraction in some cars.